Low Headroom Hoists
What is a Low Headroom Hoist?
A Low Headroom Hoist is a specially engineered lifting device designed to maximize vertical lifting capability when building height or clearance is restricted. It achieves this by mounting the hoist motor and trolley in a compact side or parallel configuration to reduce the “headroom” — the distance between the hoist hook and the beam. Street Crane’s Low Headroom Hoists are the ideal solution for facilities with low ceiling heights, tight space constraints, or retrofit requirements, where standard hoists would not provide sufficient lift height.
Why Use a Low Headroom Hoist?
Challenge | Low Headroom Hoist Advantage |
Limited ceiling space | Allows highest possible hook position |
Existing buildings or older facilities | No major structural changes required |
Costly expansion to raise building height | Avoided by compact lifting design |
Space constraints in mezzanines, foundries, machine shops | Solved through reduced hoist profile |
Whether it’s a new plant with design limitations or a retrofit project in an aging structure, Street Crane’s low headroom series ensures lifting without compromise.
Street Crane's Low Headroom Hoist Design Highlights
Proven Engineering, Trusted Worldwide
- Lateral motor and gearbox arrangement minimizes overall height
- Designed to suit both monorail and double girder cranes
- Available in top-running and underslung models
High Performance in Tight Spaces
- Lifting capacities up to 25 tonnes
- FEM M5–M7 duty ratings for frequent, demanding operations
- Smooth, quiet operation with two-speed or VFD drives
Full Safety & Compliance
- Load limiters, upper/lower limit switches, and slip clutches
- Thermal motor protection
- Meets ISO, FEM, and local regulatory standards
Typical Applications for Low Headroom Hoists
Industry | Example Use Case |
Automotive | Engine assembly zones with limited roof clearance |
HVAC Fabrication | Duct lifting in low-clearance mezzanines |
Metalworking | Mould transfer in tight die shops |
Food Processing | Lift and move sensitive loads in cleanrooms |
Oil & Gas | Skid-mounted lifting systems in restricted platforms |
Water Treatment | Confined space maintenance systems |
Utilities | Generator lifting in tight powerhouses |
Parameter | Value |
Lifting Capacity | Up to 25 tonnes |
Lifting Height | Customizable – up to 50+ meters |
Duty Classification | M5 – M7 (FEM) |
Hoisting Speed | Dual speed / VFD variable |
Travel Type | Monorail, Double Girder, or Underslung |
Mounting Options | Foot-mounted or trolley-mounted |
Control Options | Pendant, Radio Remote, or VFD Control Panel |
Technical Specifications Snapshot
Advantages of Street Crane Low Headroom Hoists
- Optimized for retrofit: Fits into existing crane structures
- Custom fabrication: Integration with Al Waha-built cranes
- Reduced total building cost: No need to modify or raise roof
- Enhanced safety: Proximity sensors and overload monitoring
Increased uptime: Enclosed gearboxes, sealed bearings, and low-wear components
Al Waha Cranes – Your Trusted Hoist Partner in MENA
As a regional leader in crane solutions for over 20 years, Al Waha Cranes provides:
- Technical consultation on headroom limitations
- Bespoke crane system design using Street Crane hoists
- Installation and load testing across UAE & Saudi Arabia
- Local spare parts and AMC support
From Sharjah to Dammam, from Dubai factories to Riyadh logistics hubs, we’ve delivered low headroom systems that maximize floor utility and productivity.
Frequently Asked Questions
This varies by load and configuration, but Street Crane low headroom hoists can reduce clearance requirements by up to 35–50% compared to standard hoists.
Yes, with weatherproof enclosures and IP-rated components, they can be adapted for outdoor and semi-outdoor use.
Absolutely. Our engineers can retrofit most existing cranes with a low headroom hoist and travel mechanism.
Lead time ranges from 2–6 weeks depending on customization. Al Waha Cranes stocks essential models for faster delivery in UAE and KSA.
They’re engineered to reduce the vertical space needed between the hook and support beam, allowing maximum lift height in low-clearance environments.
Ideal for facilities with restricted ceiling heights, like automotive shops, mezzanines, cleanrooms, or old industrial buildings.
