Any accident or mishap of an EOT Crane can
be fatal to an individual and is life-threatening. This is why proper
care should be taken at regular intervals to ensure the smooth
functioning of EOT Crane. This includes proper inspection and steps to
be followed throughout the process of designing, manufacturing,
installation and operation. Once the procedure begins in full force, the
next step is to ensure accurate measures of maintaining the health of
EOT Crane. test
How to do that? Scroll to find out.
Here is a manual for all your EOT Crane maintenance needs.
How to maintain the Control Panel in EOT Crane?
? The control panel is the brain of any EOT Crane. This is where all the primary functioning is processed.
? The
control panel constitutes an elongated panel box that incorporates all
power and auxiliary contactors, switch gears, relays and supplemental
control equipment
? The
apparatus inside the panel has permanent labels of identification that
are in accordance with the circuit diagram presented. Additionally, all
control and power terminals shall also have similar identification
labels
? These terminals need to be inspected once every month or three months
? All the connections and terminals present at the switchgear should be completely tight
? Next comes Insulation Resistance between terminals and the earth This should be inspected once every month.
How to conduct Wire Rope Maintenance in EOT Crane?
? The wire rope should be discarded based upon the careful inspection of its strand and the rope diameter. The ISO 4309 gives the procedure for replacement criteria for any wire rope.
? During
the inspection of wire rope, check for any damage that’s occurred to
the rope thimbles, clevis pins or any holes that might have gotten
elongated
How to maintain the Travel Gear Box in EOT Crane?
? The lubricating oil in the travel gearbox is completely enclosed and filled up to minimum level marked in all gearbox
? There is an inspection cover present on the top of the gearbox to regularly examine the condition of gears and gearings
? Correctly
and thoroughly check the gearbox casing, drain plugs, filler and the
oil seals to ensure there are no signs of seepage or any lubrication
leak
? The ventilation plug should be inspected and cleaned meticulously
? The reliability and security of fixings should be examined and renewed whenever necessary
? Drain
the gearbox of all the oil during examination and replacement, detach
the inspection cover and check for any signs of wear and tear
? If there is any damage caused to the gear teeth, replace them
? Inspect the security of keys and keyways
? When
the gearbox is opened for maintenance, thoroughly clean the mating
surfaces, and apply an appropriate sealing compound should while
remaking the joint
? In order to hoist the gearbox seal, gasket glue should be used according to the requirement
? Ensure that no sealing compound enters the oil passage inside the flanges of the gearbox
How to check the hoist and travel brake in EOT Crane?
? You
need to carry out a functional check of every motion brake in order to
ensure that they are operating correctly and adequately
? Inspect the output condition through the brake rectifier
? The
next step is to conduct a thorough cleansing of the brake, check for
any air gaps within, examine the worn out parts and renew wherever the
need occurs
? Peculiarly
check the wear and tear that's occurred on the rotor disc. This also
includes examining the condition of the spline on both the hub and the
rotor.
? Inspect the condition of the hub key and keyway
How to do the maintenance of Couplings?
? This should be conducted at least once a year
? The
examination should be thoroughly carried out to ensure the tightness of
the bolts that connect the machinery, as well as the wear and tear
occurring in the coupling
? The
damage transpired can be checked from the outside by inspecting the
positions of the points concerning the two notches in the boss
? In case the pointer is placed exactly between the two notches, no wear or tear has taken place
When does the EOT maintenance happen?
We
at Alwaha, offer a host of care, repair and maintenance services that
drastically cut the downtime and ensure the smooth operation of your
cranes. With a team of experienced technicians and service providers,
our facilities are well-renowned for precision and faster turn-around
times. We specialize in all services of EOT Crane Dubai and bring the
touch of premium aid. Here’s what we provide you with:
Daily Inspection of EOT Crane
Through
a daily operator who checks in for any overhead loose parts, brakes,
limit/end switches, overall condition of wire ropes, any external
damages affecting the safety, greasing and lubrication.
Weekly Inspection of EOT Crane
This
is conducted by a maintenance mechanic and additionally a supervisor as
well. The overall examination is similar to daily inspection with a
supplementary check of the crane while it is idle, i.e., during the
weekends. Reports from the operators from the entire week left
unattended are also taken into account. The oil gearbox is thoroughly
checked, and if required, the oil is filled up to the indicator levels.
Spot checks are also carried out. With the specialization of EOT Crane
Dubai Maintenance levels, we provide the best services week on week.
Quarterly Inspection of EOT Crane
This
is taken care of by the maintenance supervisor. If there is less use of
the cranes, they can be checked once every quarter. Inspection and
repair are conducted for structural damage, any sign of unusual wear or
tear, loose hangings, bearings & pins, drums & hoisting gear,
hooks & wire ropes. Control mechanisms are thoroughly examined along
with the gearbox, overload relays, conductor coils, timers and fuses.
Yearly Examination of EOT Crane
If
you are checking up on your cranes only once a year during the
holidays, it is crucial that you take a worldwide appreciated service.
That is why Alwaha Cranes provide you with EOT Crane Dubai specialized
assistance.
In
the yearly inspection, special attention is paid to the brake
functioning, crane structure, travel wheel wear & tear, wire ropes,
hoist mechanism and safety devices. All greasing and lubrication are
attended to thoroughly, and oil is topped in the gearbox as well.
Additionally, testing is carried out after the inspection with a 25%
overload. Similar examinations are performed on the functioning of
electrical equipment and other safety devices.
The mandatory record checking and attention are certified by the supervisor.
—-------------------------------------------
Here is a checklist manual of all how to maintain Greasing on EOT Crane rails
The
first and foremost step is to ensure that there is limited greasing on
the EOT Crane rails and is carried out according to the manual.
First limited greasing on EOT rails as per manual. Otherwise make sure dust free of rails
Over greasing cause slippage, Can’t stop at right place due to slippery.
Check brake unit, whether brake shoes are in good condition.
Suppose
any malfunction noticed, should dismantle the unit and check all parts
are good condition, some parts worn out, it should be replace
Chain
or rope unit check this rope is good condition, if the rope is minor
damage found .I should replace otherwise it will leads to serious injury
Check cross rails, long rails,gutters inspect periodically, moreover greasing point bearings should grease periodically
Observe abnormal noise came from EOT Crane. Immediately EOT crane hand over to maintenance department
They should throughly inspect with help of why why analysis. And found error and rectified again hand over to concern department